Conotech U/UTP Cat.6 GEL computer twisted-pair cable – copper, outdoor, black UV, gel-filled – 305 m
Are you looking for a reliable cable for building a modern and durable network installation? Conotech U/UTP Cat.6 computer twisted-pair cable is a cable designed for demanding outdoor conditions. Made of pure copper, equipped with a UV-resistant sheath and gel filling, it ensures stable and secure data transmission even in harsh environments. It is an excellent choice for professional ICT installations where reliability and high transmission quality matter.
Key product features:
- Cable type: U/UTP Cat.6 GEL + PE computer twisted-pair cable, made of pure copper.
- Construction: four pairs of 23 AWG copper conductors (Ø 0.57 ± 0.02 mm) twisted asymmetrically, separated by a cross separator.
- Insulation: high-density HDPE polyethylene with the addition of hydrophobic gel protecting against water penetration.
- Outer sheath: black PE polyethylene, resistant to UV radiation and mechanical damage.
- Outer cable diameter: Ø 6.0 ± 0.02 mm.
- Flammability class: Fca.
- Operating conditions: operating temperature from -20°C to +70°C, installation temperature from 0°C to +70°C.
- Minimum bending radius: >8 cable diameters.
- Application: outdoor and underground installations in ICT and industrial networks.
- Protection: filling gel provides additional resistance to moisture and stable signal transmission.
- Packaging: 305 m length in a practical Easy Pull Box carton with metre marking.
- Compliance with standards: ISO/IEC 11801:2010, EN 50173-1:2011, IEC 61156-5:2002, TIA/EIA 568-B.2:2001.
- Certificates: standardized quality confirmed by the National Institute of Telecommunications in Warsaw.

Practical application
Conotech U/UTP Cat.6 computer twisted-pair cable was created for reliable data transmission – both analogue and digital. It is ideal for ICT installations and fixed structured cabling in buildings. Thanks to the UV-resistant PE polyethylene sheath and gel filling, the cable is fully prepared for operation in difficult conditions – both outdoors and underground. This construction protects the installation against moisture, mechanical damage and interference, ensuring stable and secure signal transmission in every situation.

Technical specification
Parameters:
- Type: U/UTP, Cat.6 GEL + UV made of pure copper
- Inner conductor: CU, four pairs twisted asymmetrically Ø 0.57 ± 0.02 mm, wire - 23 AWG
- Conductor insulation: HDPE polyethylene (PE) + hydrophobic gel
- Cross separator: polyethylene (PE)
- Outer sheath: PE polyethylene, black color
- Outer diameter: Ø 6.0 ± 0.02 mm
- Flammability class: Fca
- Operating temperature: -20 C ÷ +70 C
- Installation temperature: 0 C ÷ +70 C
- Minimum bending radius [x cable diam.]: >8
- Intended use: outdoor, underground
- Compliance with standards: ISO/IEC 11801:2010, EN 50173-1:2011, IEC 61156-5:2002 and TIA/EIA 568-B.2:2001
1.Carefully read the instruction manual or manufacturer's recommendations before use.
2.Use the product according to its intended use.Improper use can lead to damage or health risks.
3.For electrical appliances: don't use them in a humid environment, don't leave them unattended, and always unplug them after use.
4.Children's products should only be used under adult supervision.
5.Do not use a product that is damaged.This could pose a security risk.
6.If you have doubts about the technical condition of the product, contact the seller.








