Balcony ballast balcony slab stand non-invasive
Balcony ballast stand non-invasive is used when it is not possible to anchor the structure to the ground (such as a roof, sidewalk, balcony, terrace). Stable construction due to the use of weights in the form of concrete slabs. Bracket made of hot-dip galvanized steel - fully protected against corrosion. Base for 1 concrete slab (500x500mm) equipped with feet and additional mast supports.
!!NOTE: The set does not include the mast.
Application of the stand:
- satellite dishes
- terrestrial antennas (with a cybant with a diameter of at least 48mm)
- radio and Internet antennas (with a cybant with a diameter of min. 48mm)
- cameras (with the use of the Mounting ADAPTER)
Specifications:
- mounting method: intended to be placed on the sidewalk or terrace
- material: steel
- coating: galvanized
- angle bar 40x40x3
- mounting clips: 3 pcs
Load recommendations for individual antenna diameters:
1. Ballast load for antenna canopy diameter and mounting height up to 1 meter::
- 60 cm diameter ? 3 plates with a total weight of 108kg,
- 80 cm diameter - 5 plates with a total weight of 180kg,
- diameter 100 cm - 7 plates with a total weight of 252kg,
2. Ballast load for the diameter of the antenna canopy and installation height up to 0.5 meters:
- diameter 60 cm ? 2 plates with a total weight of 72kg,
- diameter 80 cm - 3 plates with a total weight of 108kg,
- diameter 100 cm - 4 boards with a total mass of 144kg,
Values given with the assumption that the antenna will be mounted in the wind load zone up to 72 km/h (gusts 158 km/h).