Unicable 24UB + 2x MULTIROOM GT-SAT GT-S2dCSS24 converter
UNICABLE II satellite converter programmed for Polish platforms: Canal+ and Polsat Box, also dedicated to all satellite decoders supporting the Unicable I and II system. It is ideal for installations with PVR decoders with FBC heads that allow handling several channels at the same time.
Programmed and dedicated for decoders of Polish operators:
Polsat Box:
- Unicable I/II technology (EN50494 + EN50607): Evobox PVR
- Unicable I technology (EN50494): Mini HD 2000, HD 3000, HD 5000, HD 5500s, HD 6000, HD 7000 PVR
Canal+:
- Unicable I/II technology (EN50494 + EN50607): 4K UltraBOX+
- Unicable I technology (EN50494): mediaBOX+ (ADB ITI-3740SX), turboBOX+ (ADB ITI-5720SX), wifi PremiumBOX+ (ADB NCP-4740SF), BOX+ ADB ITI-2849/2850/2851S), PVR BOX+ (ITI-5800SX)
Settings in receivers:
- In the Polsat Evobox PVR receiver, we can choose 3 fixed unmanaged operating modes, the first is traditional Unicable I settings, then we occupy channels 1-4, the second setting is Evobox 1, we occupy channels 5 to 12, the third is Evobox 2, then we occupy channels 13 to 20. We must remember that in one single-cable installation the operating channels must not overlap each other! Example of multiroom: two Evobox PVRs, one in setting 1 and the other in 2! + e.g. additional decoders, in total 4 multiroom HD 6000
- In the Canal+ 4K UltraBOX receiver there is no problem because the receiver allows full management of operating channels and their frequencies, which we can easily edit, so we actually choose the frequencies we want or any free ones in the installation, max up to 8 channels per decoder.
The remaining receiver models support Unicable I technology, so we can install 4 decoders or one with four operating channels for PVR!
- In one installation, of course, there may be both Polsat and Canal+ decoders, e.g. 4 standard multiroom units in the Unicable I standard, Evobox PVR + 4K UltraBOX thanks to Unicable I/II technology !!!
GT-SAT GT-S2dCSS24 Unicable SCR LNB converter for single-wire (serial) transmission of satellite signal to max. 24 receivers marked Unicable II.
The LNB also has two standard satellite signal outputs for two other satellite receivers (multiroom).
UNICABLE technology consists in fixed reservation of part of the IF band for each of the connected satellite tuners.
The tuner sends requests to the converter for access to a given transponder and receives the signal at the reserved frequency.
A necessary condition for using UNICABLE technology is its implementation in the tuner.
List of programmed 24 Unicable frequencies:
1. 1210MHz 2. 1420MHz 3. 1680MHz 4. 2040MHz 5. 978MHz 6. 1028MHz 7. 1072MHz 8. 1116MHz 9. 1160MHz 10. 1271MHz 11. 1315MHz 12. 1359MHz 13. 1484MHz 14. 1528MHz 15. 1572MHz 16. 1616MHz 17. 2084MHz 18. 2128MHz 19. 1816MHz 20. 1860MHz 21. 1904MHz 22. 1948MHz 23. 1992MHz 24. 1728MHz
Specification
Technical parameters:
- Model GT-SAT GT-S2dCSS24
- 1x Unicable UB x24 output
- 2x Legacy output (Multiroom)
- Attenuation: 0.1 dB (typ)
- Legacy port gain: 57 - 61dB
- SAT-SCR port gain: 42 - 62 dB
- Control signal: EN50494, EN50607, dHello
- Interwire isolation:> 22dB
- Control: DiSEqC 2.0
- Temperature range: -40 °C to + 65° C
- Legacy port power consumption: 100mA
- Supply voltage: 10-20V
- SAT-SCR port energy consumption: 4.5W
- Legacy port energy consumption: 140 mA
- Diameter - 40mm
- Compatible with HD, 4K, DVB-S2/X FBC