OMNI 902 and PUCK 12 antenna set for professional applications on yachts and boats
The presented set is one of the two best antenna configurations for ships, boats, yachts, and other types of watercraft. Poynting is an international manufacturer of specialized antennas for various industries. A team of specialists ensures that your signal is always strong and the network reliable. The presented MARINE 002 set is a solution for everyone who has so far dreamed of satisfactory GSM and WiFi network coverage while sailing. It is probably one of the best sets for these applications on the international market.
OMNI 902 marine antenna
The OMNI-902 antenna is a market novelty that introduces the OMNI-9xx series. These are highly specialized antennas that leave all competitors far behind when it comes to omnidirectional antennas suitable for marine applications. Never before have any antennas pulled in signals from such long distances and amplified them enough to be used on the largest ships. The antenna impresses not only with its size, but also with excellent, even coverage of all modern LTE/5G frequency bands. The antenna design consists of two high-gain antennas, hence its very good performance. And what about its durability? The manufacturer took care of that as well. The antenna meets IP68 standards, which means resistance to water and dust. The housing is also resistant to salt in seawater, so it will survive even the biggest storms and gales. The OMNI-902 marine antenna is a purchase for many years, and extreme conditions will not make it show its age.
PUCK 12 WiFi antenna
A small antenna for boosting the 5G/LTE internet network, which perfectly complements the above-mentioned OMNI 902 antenna for marine applications. It has two WiFi connectors that guarantee excellent coverage on a ship, boat, yacht, and other watercraft. Do not be fooled by its small size - it is a powerful omnidirectional antenna that you can mount in various ways. Together with the marine antenna, it creates a reliable set for use wherever it is necessary to have the best possible network on board. You will never again experience network loss, which is essential for sailing and communication between people, devices, and teams. Use the set on yachts, catamarans, or various types of cutters and boats to see that this set is indispensable for you.
Below is the detailed specification of each antenna in the set:
Poynting OMNI-902 wideband omnidirectional antenna
OMNI-902 is an ultra-wideband, high-performance omnidirectional antenna that covers current 4G/LTE operating frequencies and future 5G with excellent balanced gain across all frequencies. The antenna’s ultra-wideband performance allows operation in the range from 617 to 4200 MHz, with a peak gain of 8 dBi. The antenna is future-proof because it covers the upcoming LTE band 71 (617 to 698 MHz band), as well as the CBRS band 3400 to 3800 MHz, which will be used in future 5G applications. Thanks to this, the antenna can be used in all parts of the world and guarantees signal reception almost everywhere. The antenna design allows excellent pattern control over the entire frequency range, making the OMNI-902 a truly high-performance omnidirectional antenna suitable for marine and coastal applications. Exceptional wideband performance is an important factor for LTE and future 5G technologies, where these technologies rely on features such as Carrier Aggregation (CA) to provide the best possible reception and throughput across multiple frequency bands simultaneously.
Product features
- High-gain omnidirectional antenna
- Covers band 71 (617 to 698 MHz) and 5G 3.5 GHz bands
- Operates wideband, making the antenna future-proof
- The antenna is specially designed to operate on the open sea
- Rugged and weather-resistant construction with IP68 protection rating
- UV- and saltwater-resistant housing for marine applications
Antenna application
- Marine applications / Yachts / Ships / Ferries / Container ships
- Improved 4G/LTE and 5G reception
- IoT and M2M applications
- Areas with poor data signal reception
- Greater reliability and stability of data transmission connection
Antenna performance charts
Voltage Standing Wave Ratio (VSWR)
VSWR is a measure of how efficiently radio-frequency power is transmitted from the power source through a transmission line to the load. In an ideal system, 100% of the energy is transmitted, which corresponds to a VSWR of 1:1. The OMNI-902 provides excellent performance across all bands with a VSWR of 2.5:1 or better in more than 90% of the bands. + Antenna VSWR measured using a 2-meter low-loss cable
Gain in dBi
8 dBi is the peak gain across all bands from 617-4200 MHz
- Gain @ 617 ?960 MHz: 6dBi
- Gain @ 1427 ?1517 MHz: 5.8dBi
- Gain @ 1710 ?2700 MHz: 8dBi
- Gain @ 3400 ?4200 MHz : 5.5dBi
*Measured antenna gain with aligned polarization standard antenna
Radiation patterns
Technical specification
Click here to ознакомиться with the full technical documentation of the antenna.
Poynting PUCK-2 LTE MIMO 6 dBi wideband panel omnidirectional antenna
The new PUCK series from Poynting offers small low-profile panel antennas for use in IoT / M2M, smart metering, smart utilities, transport, marine navigation, and agriculture. The PUCK-2 consists of a 2-in-1 antenna system in a single housing with 2 × 2 MIMO LTE antennas (for 2G / 3G / 4G), covering the 698 to 3800 MHz band, the most popular international LTE bands. PUCK outperforms many competitors thanks to the attention paid to the design of this high-performance antenna. The radiation characteristics of all radiating elements ensure an excellent balance between omnidirectionality, pattern diversity, and good radiation capabilities at the desired elevation, which is often overlooked in antennas of such small size. Despite its compact size, this antenna provides excellent performance, especially in higher frequency bands where performance is critical for LTE throughput and connection stability. This antenna has been designed so that both LTE ports are connected to the router / device to ensure the best performance. Check out other derivatives of the PUCK series that are more suitable for SISO applications.
Product features
- 2-in-1 LTE with high performance and reception across multiple frequencies
- 2G / 3G / 4G / LTE antenna (5G ready)
- For LTE technology (2X2 MIMO)
- Wideband - covers a wide frequency band, including CBRS 3.5 GHz band
- Ground-plane independent
- Rugged, vandal-resistant and waterproof housing (IP 68)
- Ideal for transport, marine applications and IoT / M2M
- Ultra-veZAtile mounting options for easy installation
Antenna application
- Smart tools: smart metering of electricity, gas, and water
- Smart buildings: climate control, access control, security, irrigation
- Digital Signage
- Warehouses and logistics systems
- Industrial automation, robotics, and other M2M systems
- Transport (buses, municipal services, and public safety)
- Communication, telemetry, and automation of mining vehicles and machinery (M2M and IoT)
- Agricultural machinery
- Marine: small boats, yachts near coasts or inland waters
Antenna performance charts
Voltage Wave Ratio (VSWR)*
VSWR is a measure of the efficiency of transferring radio-frequency power from the power source through the transmission line to the load.
In an ideal system, 100% of the energy is transmitted, which corresponds to a VSWR of 1: 1, the PUCK-1 provides excellent performance across all bands with VSWR ?2.5: 1 over 85% of the band
Gain in dBi
6dBi is the peak gain across all bands from 698-960,1710-2700 and 3400-3800 MHz
- Gain for different bands: -1dBi @ 698-960MHz
- Gain for different bands: 6 dBi at 1710-2700 MHz
- Gain for different bands: 6 dBi at 3400-3800 MHz
Radiation patterns
PUCK-2 wideband antenna presentation (video)
link: https://youtu.be/wQ7WTtjMNPM
Links to other videos about PUCK-2:
Unboxing - https://youtu.be/AfL5b7pRWbk
PUCK high-voltage test - https://youtu.be/A-3FVcQjK-I
PUCK wind tunnel test - https://youtu.be/Yga3oqAGly0
Durability test - https://youtu.be/MS_gkMZ26tE
Designing 4x4 MIMO solutions - https://youtu.be/YsRRjBAfX4k
Many mounting options
The new PUCK antenna series from Poynting provides easy installation with many mounting options. This includes as standard:
- Stud mount - two different lengths included (40 mm and 80 mm)
- Vertical pole mount (internal and external mounting for smaller and larger poles)
- Horizontal pole mount (e.g. marine rails)
- Magnetic mount
- Surface mount (double-sided tape)
- Wall mount
Key technical features:
Technical specification
Click here to ознакомиться with the full technical documentation of the antenna.
