Digital detector locator cable, metal and wood finder in walls PeakTech 3433
The new PeakTech 3433 has been specially developed for everyday use in craftsmanship, as it can be used to locate wood, metal or live wires to ensure that no damage is caused as a result of chiseling, grooving or drilling work in walls. The inverted LCD display shows the distance to the detected material and helps the user assess the internal condition of the wall to avoid damaging pipes or live circuits. The sensor detection depth ranges from 20 mm (wood) to 120 mm (metal) depending on the material being searched for. In addition, the LED diode (green, yellow, red) indicates whether material has been found or whether there is a live line at the current test point. Simple operation, safe application and high build quality make this model an indispensable companion for every craftsman, DIY enthusiast or installer during maintenance and all work in the construction sector.
Key features of the P3433 digital scanner
- LED diode (green, yellow, red) with audible signal
- measurement depth up to 120 mm, depending on the material
- display of the distance to the measured material
- inverted 6 cm (2.4") LCD display with backlight
- IP54 water and dust protection
- metal/live wires mode
- wood mode
- wrist strap for optimal transport of the device
- automatic switch-off after 5 min.
- self-calibration during startup
- detection of ferrous and other metals
- visual and audible warnings with additional LED diode
- dust and water protection IP54
- accessories: case, battery and instruction manual
Specification:
- Maximum scanning depth:
Ferrous metals - 120mm ? 10mm
Non-ferrous metals (copper) - 80mm ? 10mm
Live wire - 50mm ? 10mm
Wood - 20mm ? 10mm
- Automatic switch-off - approx. 5 minutes
- Protection standard - IP54
- Display - 6 cm (2.4 inch)
- Operating temperature -10 ? + 50
- Storage temperature -20 ? + 70 ?
- Power supply - 1x9V battery
- Size - 200x83x28mm
Instruction manual for download >>HERE<<
All products of the PeakTech company have the appropriate certificates, declarations and markings, both in terms of
use and measurements. PeakTech production is certified according to the ISO 9000 quality management system.
The manufacturer's priorities are quality and safety as well as reliability combined with a performance-to-price ratio.
Unlike measuring devices from other manufacturers offering one-year warranties, PeakTech provides:
3-year warranty for its entire range. Materials such as software or manuals are available at
www.peaktech.spacetronik.eu or at www.peaktech.de. As a distributor of PeakTech equipment on the Polish market, we provide
assistance in the selection and use of appropriate equipment.
The offer includes oscilloscopes, generators, frequency counters, meters, testers, multimeters, electrical installation detectors,
energy meters, LAN network testers, voltmeters, thermometers, tachometers and many others...
PeakTech product catalog: https://s.spacetronik.pl/zdjecia_DMTRADE/katalogi/peaktech/katalog_peaktech.pdf
PeakTech new products catalog: https://s.spacetronik.pl/zdjecia_DMTRADE/katalogi/peaktech/katalog_nowe_peaktech.pdf
Net wholesale price list in Euro for PeakTech meters: https://s.spacetronik.pl/zdjecia_DMTRADE/katalogi/peaktech/ceny_hurt_euro.pdf