Noyafa NF-8209 LAN cable tester with advanced functions
A diagnostic device for network cables with an LED display. The NF-8209 is a new generation offering digital and analog signaling in one network toner and probe. It has three . modes for cable tracing options, such as digital mode, analog mode, and PoE mode. This means it is equipped with the most powerful cable location technologies for every working environment. It also includes cable length measurement, cable fault testing, PoE testing, hub flashing, and an NCV function, all of which make it an essential tool for cabling engineers. It tests connection correctness by detecting damage such as open circuit, short circuit, and reversed pairs. Additionally, it is equipped with a signal generator and pair finder, enabling it to locate a specific wire in a tangle of cables. By connecting the tester to a switch or router, it allows easy identification of the network termination by lighting the LED at the RJ45 socket.
Basic Functions:
- 3 cable tracing modes ? digital, analog, and PoE . In digital or analog mode, the tone generator sends strong, clear tones to enable faster cable locating. If the cable you want to identify is connected to a PoE switch, the PoE scanning mode will make cable tracing more precise.- 3 Cable testing capabilities ? wire map, length, and PoE . The NF-8209 enables wire map testing and checking 5 common connection problems, including open, short, crossed, split, and reversed pairs, measuring LAN cable lengths in the range of 2.5 m - 500 m, testing PoE device information such as PoE voltage, polarity, and power mode, PSE type (AF or AT standard).
- Testing flash port and switch details . The port flashing function allows locating network ports by flashing the port light on switches or routers and provides information about the connected switch, such as its speed, transmission mode, and protocol.
- 128x64 dot graphic LCD display . The NF-8209 cable locator is equipped with a bright and easy-to-read LCD display, which greatly facilitates its use. Any cable problems can be easily identified and tracked by looking at the tester's visual and well-lit display.
- Non-contact voltage detection (NCV) . The receiver (tone probe) can be used to detect the presence of AC voltage.
Product features
- RJ45 ports
- Power supply 3xAAA, 9V
- Supported cables Cat 5, Cat 6
- Maximum tested cable length 600m
User manual available >>HERE<<
1.Carefully read the instruction manual or manufacturer's recommendations before use.
2.Use the product according to its intended use.Improper use can lead to damage or health risks.
3.For electrical appliances: don't use them in a humid environment, don't leave them unattended, and always unplug them after use.
4.Children's products should only be used under adult supervision.
5.Do not use a product that is damaged.This could pose a security risk.
6.If you have doubts about the technical condition of the product, contact the seller.