NOYAFA NF-8506 network cabling tester
A connection to the Internet these days is essential to function in many areas of life. The most stable connection gives us a wired connection. However, in order for it to work properly, we need to be sure that the cable is not damaged. For this purpose, the NOYAFA NF-8506 network cabling tester will come in handy !
Comprehensive cable testing with the NOYAFA NF-8506 tester
The NOYAFA NF-8506 meter is not only for testing ordinary RJ45 cables. RJ11 cables can also be tested. With the NF-8506 you can also locate the cable and measure its power. One device will help you diagnose your home network in a simple and convenient way.
Accurate cable length measurement
With the NOYAFA NF-8506 meter you can conveniently, accurately measure the length of your cables. The tester will identify cable runs to quickly detect any discrepancies and faults. Cable measurement of up to 200 meters is available.
PoE testing
Efficiently detect PoE devices. Including non-standard and IEEE 802.3AF/IEEE 802.3AT compliant ones. Ensure comprehensive PoE detection.
Take care of your safety with a non-contact voltage tester
Any job where you may encounter electrical wires can put you at risk. By using the NF-8506 tester, you are able to dramatically increase your safety. With any type of electrical work, you will be able to easily identify live equipment. What's more, you will also find live wires and sockets in the same way. This will allow you to avoid potential hazards.
Easy-to-use design of the NOYAFA NF-8506 tester
The NOYAFA NF-8506 tester was built to be as easy to use as possible. It has a handy and portable design. So you can easily carry it from one place to another. So that you always have it at hand. The silicone buttons are arranged at a comfortable distance from each other, so that you can operate the tester with one hand. In addition, it has been equipped with a large and bright LCD screen so that you can control the entire diagnostic process in real time. On the other hand, built-in LED lights will allow you to find the right cables even in the darkest rooms. With the NOYAFA NF-8506 tester, cable diagnostics will be more enjoyable than ever before.
NCV Detector
The NOYAFA NF-8506 network connection meter is equipped with an NCV detector. This means that with its help you will be able to detect non-contact voltages in insulated cables. Make your job easier today with the NOYAFA tester.
Quick wire and port mapping
Allow yourself to easily identify CAT5/CAT6 cables. Check cabling sequences and detect various problems such as short circuits or crossings. In addition, you can easily identify ports connected to your router with flashing lights. The NOYAFA NF-8506 tester provides additional information on port speeds and duplex modes.
The NOYAFA NF-8506 multifunctional cable tester that works well in many industries
Due to its capabilities, the NOYAFA cable tester will be perfect for all engineering work. Moreover, it will also be useful for data center maintenance or equipment upgrades. Therefore, it will find its application equally at the occasion of various renovations. What's more, the 3.7-volt polymer-lithium battery with a capacity of 1,500 mAh will provide you with a long time of use. And thanks to the USB-C port, you can easily charge the device with a popular cable.
Technical specifications:
Model:
- NF-8506
Cable scanning:
- Digital mode/analog mode
Automatic shutdown:
- Yes
Low power information:
- Yes
Transmitter:
- Cable continuity test: remote control and switch
- Cable length test: range: 5 ? 200 m (? 3 m)
- Flash port:10 M/100 M/1000 M
- POE: middle span/end span test/at-4 pairs/acceleration
- Link speed: 10 M/100 M/1000 M/duplex mode (full duplex/half duplex)
- Battery: 3.7V lithium battery
- Function: Ping scan function/IP scan function
- Transmitter dimension: 150×75×35 mm
Receiver:
- Sensitivity adjustment: Yes
- NCV: Yes
- LED light
- Handset
- Battery: 3.7V lithium battery (1500 mAh)
- Receiver dimension: 200×50×33 mm
