NOYAFA NF-918S network cabling tester
A connection to the Internet these days is essential to function in many areas of life. The most stable connection gives us a wired connection. However, in order for it to work properly, we need to be sure that the cable is not damaged. For this purpose, the NOYAFA NF-918S network cable tester will come in handy !
Comprehensive cable testing with the NOYAFA NF-918S tester
The NOYAFA NF-918S meter is not only for testing ordinary Internet cables. In addition to testing RJ45 cables, optical cables (fiber optics) can also be tested. In addition, UTP and STP cables, telephone cables, electrical cables and BNC coaxial cables. With the NF-918S, it can also locate the cable and measure its power. One device will help you diagnose your home network in a simple and convenient way.
Accurate cable length measurement
With the NOYAFA NF-918S meter, you can conveniently, accurately measure the length of your cables. The tester will identify cable runs to quickly detect any discrepancies and faults. Cable measurement of up to 500 meters is available.
Tone generator, allowing you to keep your workspace organized
Using the built-in tone generator and probe set, you are able to track and identify cables easily. Make it easy for you to locate specific cables in complex network configurations. In addition, so that you don't forget in the future, you can label each cable accordingly. In this way you will always keep your workstation in order. Any subsequent cable replacement will be much simpler and faster thanks to this.
Easy-to-use design of the NOYAFA NF-918S tester
The NOYAFA NF-918S tester was built to be as easy to use as possible. It has a handy and portable design. So you can easily carry it from one place to another. So that you always have it at hand. The silicone buttons are arranged at a comfortable distance from each other, so that you can operate the tester with one hand. In addition, it has been equipped with a large and bright LCD screen so that you can control the entire diagnostic process in real time. On the other hand, built-in LED lights will allow you to find the right cables even in the darkest rooms. With the NOYAFA NF-918S tester, cable diagnostics will be more enjoyable than ever before.
Scan cables among different signals
With the NOYAFA NF-918S cable tester you are able to quickly scan and locate the cable you are looking for. The sensitive jam-resistant detector will allow you to find the cable even though there are various other signals around. You have a choice of one of two scanning modes: digital and analog.
Analog: Find the cable via analog signals,
Digital: Find the cable among bundles of cables despite other noise and signals.
Fiber optic and PoE power meter
With Power over Ethernet (PoE) detection, you can easily identify PoE switches. You will be able to determine the power in the network cable with this. This can come in handy for you, especially for IP cameras or VoIP telephone installations. However, with the NOYAFA NF-918S network meter you are able to do much more. You can also test the signal strength of a fiber optic cable. There are 6 wavelengths available: 850, 1300, 1310, 1490, 1550, 1625 nm. What's more, when the power is insufficient, you can check whether the fiber optic cable is damaged. If the red light flashes when you connect the optical cable to the tester, it means that it is fully operational. Otherwise, the cable will need to be replaced.
NCV detector
The NOYAFA NF-918S network connection meter is equipped with an NCV detector. This means that with its help you will be able to detect non-contact voltages in insulated cables. Make your work easier today with the NOYAFA tester.
Technical specifications:
Model:
- NF-918S
Voltage protection:
- 60 V
Charging:
- Type C charging
Transmitter:
- CONT (RJ45 switch and PoE): Short, open, cross-over;
- Scanning: analog/digital
- VFL: 10 mw
- Wavelength: 850/1300/1310/1490/1550/1625
- Optical power range: -70 to 10 dbm
- Quality control test: RJ45-8P/RJ11, shortest length ?10 cm
- Low voltage message: indicator light flashes when voltage is lower than 3.5V
- Automatic shutdown: 30 minutes
- Size: 133×69×32 mm
Receiver:
- Sensitivity adjustment: Yes
- NCV: Yes
- LED illumination: yes
- Low voltage message: yes
- Power supply: lithium battery 3.7 V 1400 mAh
- Size: 198×50×32 mm
